Welcome East China Pharmaceutical Co., Ltd. To Check And Accept Automatic Cleaning Sys

Welcome East China Pharmaceutical Co., Ltd. to check and accept Automatic tank cleaning system for reaction kettle

The automatic tank cleaning system is customized, and our clients are very satisfied with our tank cleaning system.

automatic tank cleaning equipment Overview:

The system is used for cleaning the main reaction kettle with a stirring tank. The working mode of the system is manual operation, and the operator needs to operate the entire cleaning process and assist;

chemical tank cleaning technical description:

The cleaning target is each reaction kettle, and a stirring shaft is installed in the middle;

Cleaning instructions:

The automatic cleaning cleaning equipment is in place - the equipment needs to be manually pushed to the side of the tank, the manhole is closed, the flange is locked, the water is connected to the ventilation, and the installation is ready.

Start cleaning - After the operator starts the system, enter the automatic cleaning state, divide the height position, and the center line of the can is divided into two points for symmetrical cleaning; the automatic cleaning step is shown in the schematic diagram; the entire cleaning process only needs one person to complete the control (or one person can Operate multiple units; the cleaning time for each position can be manually set and changed.

End of cleaning - After the cleaning is finished, the system automatically retracts the telescopic arm. At the same time, the coil unit is controlled by the motor and the inductive switch to control its speed and pause, to achieve the synchronization of its action, and to retract the water pipe in time and return to the position. Disconnect water and electricity.

Estimated cleaning time: about 8-12 minutes / can;